- Home
- Our Products
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
- Home
- Our Products
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
Product Information
- Backing-up both 230Vac & 110Vdc loads
- Charging batteries
- Peak Shaving
- Modularity: from 2.7 kW to 2 MW
- Balancing phase consumption (3P infrastructures)
- Performing constant power battery tests
- Re-injecting power into the (micro)grid
SKU: HPS-INVERTERS-SIERRA-25-110-230
Dual AC & DC Output Converter
Sierra 25 – 110/230 can be used as a UPS to secure AC & DC loads and charge the batteries. The 3 all bidirectional ports allow for multiple innovative applications such as grid reinjection, peak shavings, phase balancing or energy sharing through DC distribution, among many others.
By using several modules, we can offer solutions for three-phase (3x400Vac + N) infrastructures.
The module can be integrated in small or large cabinets to reach up to 2 MW. With our new Inview S monitoring, you can benefit from a unique experience.
The total output power per module is 2.7 kW, limited to 2.4 kW for each AC or DC port.
Monitor Unit – INVIEW S
Inview S GUI Interface is a standard controller for ECI technology based bi-directional products. It is a powerful web-based touch screen graphical display, it allows user to easily access, monitor the system and protected with PIN code.In addition to the touch screen a web interface is accessible via ETH port.
- Measures: AC IN, AC OUT, DC, Module Information
- 3 LED’s ( OK – Green, Minor Alarm – Orange, Major Alarm – Minor)
- 2 outgoing alarm contacts (1 – Minor and 1 – Major)
- 2 Digital Inputs
- 2.8’’ touch screen
- Web browser with laptop (ETH, SNMP, MQTT, Modbus, CAN,….)
Operating Modes
From The Grid
AC in feeds both <<AC loads>> and <<DC loads + battery>>
From Batteries
AC in feeds both <<AC loads>> and/0r <<DC loads + battery>>
From AC Loads
AC in feeds both <<AC loads>> and/0r <<DC loads + battery>>
Monitoring Devices
You may also like...
© Copyright Helios Power Solutions 2023