- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
Product Information
- Universal input 90 ~ 264VAC
- Energy Star Lev VI
- Australian 2pin plug
- Wide range of output connector options
SKU: HPS-PS-ADAPTERS-EXTERNAL-FPA
FPA
External AC/DC Power Supply: 12W -18W
The FPA series plug pack power supplies, offer customers a low-cost solution for a wide range of applications.It’s designed for applications requiring up to 18 watts of output power from 3 ~ 24VDC voltage options.
Apart from the voltages illustrated in the series table below, we can offer models to customer specifications, minimum production orders may apply to some models.
Output Plug Options
Blank 2.1 x 5.5mm Straight barrel plug Centre +VE
-01 2.5 x 5.5mm Straight barrel plug Centre +VE
-02 Exchangeable Straight barrel plug
-03 / -04 2.1 x 55mm / 2.5 x 5.5mm Right Angle barrel plug.
Exchangeable Plugs
Using an exchangeable plug, allows you to convert a 2.1mm plug to 2.5mm or a 2.5mm plug into 2.1mm plug.
Part No: P0644 converts 2.5mm to 2.1mm
Part No: P0645 converts 2.1mm to 2.5mm
SERIES TABLE
| MODEL | OUTPUT (V) | OUTPUT(A) | POWER W |
| FPA181A-050-300 | 5V | 3.0A | 15W |
| FPA181A-120-150 | 12V | 1.5A | 18W |
| FPA181A-135-120 | 13.5V | 1.2A | 18W |
| FPA181A-150-120 | 15V | 1.2A | 18W |
| FPA181A-240-075 | 24V | 0.75A | 18W |
SPECIFICATIONS TABLE
| Input Voltage: | 90 ~ 264VAC |
| Frecuency | 47 – 63Hz |
| Efficiency: | Typically 85% |
| Operating Temp: | -0ºC to +40ºC. |
| Isolation | Input-Output: 3000VAC |
| Insulation | 2pin Class II |
| Immunity | EN610006-3, -4 |
| Over temperature Protection | Will latch off in event of high operating temperature. |
| Overload Protection | Overload & short circuit protection with auto recovery |
| Dimensions | 64 x 55 x 27mm |
| Weight | 120g |
You may also like...
© Copyright Helios Power Solutions 2023