The EOL and HBC series AC/DC power supply is an Industrial Grade product, specially designed for 3U and 4U x 19in Rack Power Systems, with a number of power supply modules connected in parallel.

The rack power systems are fully assembled and configured to customer specifications for voltage and power requirements. Each module is a Plug-in unit, able to be inserted or removed from the rack without interruption to the power.

The 3U x 19in Rack can take up to 6 x 200W modules and the 4U x 19in Rack can take up to 5 x 300W or 500W modules in parallel.Best suited to powering critical loads where continuous power is required, in addition, systems can be designed with battery back- up and various alarms.Furthermore, a number of racks can be connected in parallel for high power systems.

SERIES TABLE

ModelOutput Voltage Options VMaximum Output APower W
EOL5312-125V16A200W
LOT6512-125V25A300W
HBC41912-125V20A500W
Any out voltage is possible within the range of 12 – 130V
Input and output voltage settings are customer specified and factory set.
Output current must not exceed the maximum indicated.
Part number will be allocated at the time of order.
A number of units can be connected in parallel for increased power and N+1 redundancy applications – option.

SPECIFICATIONS TABLE

Input Voltage:115/240VAC  (link selectable)
Input ProtectionInrush current limiting , Varistor,Internal safety fuse
Efficiency:Model dependent , typically 80%
Operating Temp:0°C to +50°C at full load, +70ºC  at 50% load
CoolingConvection cooled
Voltage Adjustment±5% (front panel adjustment) Other options on request
RegulationLine: ±1% Load: ±2%
OPTIONS
Output VoltageFor special voltage outputs, consult our sales deparment
Rack SystemsPower Systems with meters and distribution breakers.
Ruggedising:Modules can be supplied with a conformal coating of PCBs and a high level of ruggedisation for harsh environments.