- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
Product Information
- 2:1 Wide Input Range.
- 24V and 48V input options.
- Overload & Overvoltage protection.
- Remote ON OFF.
- Optional DIN Rail mounting
SKU: HPS-DC-DC-CONVERTERS-INDUSTRIAL-UFEC60
UFEC60 Series
Isolated DC/DC Converter Single Output : 60W
Main Features
- 2:1 input range
- 24V and 48V input options
- Single output
- 60 watts output power
- High efficiency up to 88%
- Fixed switching efficiency
- High isolation 1600VDC
- Output voltage trim
- Overload & Overvoltage protection
- Remote ON/OFF
- LED Indicator
- Optional DIN Rail mounting
SERIES TABLE
| Model | Input Range | Output Voltage | Output Current Full Load |
| UFEC60-24S3P3 | 18 ~ 36 VDC | 3.3 VDC | 14 A |
| UFEC60-24S05 | 18 ~ 36 VDC | 5 VDC | 12 A |
| UFEC60-24S12 | 18 ~ 36 VDC | 12 VDC | 5 A |
| UFEC60-24S15 | 18 ~ 36 VDC | 15 VDC | 4 A |
| UFEC60-24S24 | 18 ~ 36 VDC | 24 VDC | 2.5 A |
| UFEC60-48S3P3 | 36 ~ 75 VDC | 3.3 VDC | 14 A |
| UFEC60-48S05 | 36 ~ 75 VDC | 5 VDC | 12 A |
| UFEC60-48S12 | 36 ~ 75 VDC | 12 VDC | 5 A |
| UFEC60-48S15 | 36 ~ 75 VDC | 15 VDC | 4 A |
| UFEC60-48S24 | 36 ~ 75 VDC | 24 VDC | 2.5 A |
SPECIFICATIONS TABLE
| Operating input voltage range | 24VDC (18-36 ) 48VDC ( 36 – 75 ) |
| Output Power | up to 60 W |
| Output Voltage | See series table |
| Output Current | See series table |
| Operating Temp: | -40 to +54ºC |
| Weight Standard Type | 110g |
| MTBF | 3.307 x x 105 hrs |
| Vibration | MIL-STD-810F |
| Relative Humidity | 5% to 95% RH |
© Copyright Helios Power Solutions 2023