CSI1K-2E-IP66

DC/AC Industrial Inverters IP 66 1000VA – High Temperature

This industrial quality DC/AC inverter utilizes field-proven, microprocessor controlled high-frequency PWM technology to generate the required output power, with pure sine wave output voltage. It is packaged in three watertight, rugged die-cast aluminium IP66 enclosures. Cooling is by conduction via baseplate to a heat-sinking surface and convection via the walls of the IP66 enclosure. The internal DC/DC module is potted, the inverter module is fully ruggedized and the board is conformal coated to provide additional immunity to shock, vibration and humidity. The DC/DC input stage boosts the input voltage to a higher DC bus voltage, which feeds the DC/AC inverter to generate the required AC output. The input and output are filtered for low noise. Full electronic protection, low component count, large design headroom, and the use of components with established reliability contribute to a high MTBF. The units are manufactured at our plant under strict quality control.

Special Features: Conformal coating, IP66 Enclosure, +60 °C

CSI SERIES DC-AC Inverters

SPECIFICATIONS TABLE

Input voltage range24Vdc (21-29V)
Input ProtectionInrush current limiting
Internal safety fuse,
Reverse Polarity Protection
Load Crest Factor2 at 90% load
StandardsDesigned to meet EN 60950-1
Output Power1000 VA
Output Voltage230Vac @50Hz or 4.3 Arm continuous; Output neutral is internally connected to chassis
Efficiency80% at 100% load
Regulation± 5% from 10% load to full load
Operating Temp. 0 to +60ºC temperature for full
specification
CoolingConduction via IP66 enclosure to chassis and by natural convection