sales@heliosps.asia

Fully Managed DC Loads over TCP/IP with Smart 1U Rack Distribution Panels

  • Home
  • Our Products
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
background Layer 1
  • Home
  • Our Products
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
Home DC Electronic Loads

DC Electronic Loads

High-density Programmable DC Electronic Loads

This series of High-density Programmable DC Electronic Load provides three voltage ranges 200V/600V/1200V. Supports CV, CC, CR and CP these 4 basic operating modes, as well as CV+CC, CV+CR, CR+CC these 3 complex operating modes. Full protection including OCP, OPP, OTP, over-voltage and reverse alarm.

Remote Monitoring & Control

Support external control and monitor mode, the 0 to 10V input or output signal represent 0 to full range voltage or current. Provide OCP test, OPP test and Short circuit simulation to effectively solve the application demands for power and automated testing. Built-in RS232, RS485 and USB communication interfaces, LAN&GPIB communication card is optional.

Two or more loads can be connected in master-slave parallel mode to provide more power or current capacity. This series DC load can be applied to battery discharge, DC charging station and power electronics and other electronics products.

Product Categories

High Power Programmable DC Electronic Loads

High Power DC Programmable Electronic Loads 300W – 26.4kW

Featured Post

Fully managed DC loads over TCP IP
12V, 24V & 48VDC Fully Managed DC Loads

Search Products

SEARCH

Product categories

  • DC UPS System
  • DC/DC Converters
    • DIN Rail Mount DC/DC Converters
    • Industrial DC/DC Converters
    • High Input Voltage Industrial DC/DC Converters
    • Mil-Spec Isolated & Non-Isolated DC/DC Converters
    • Railway DC/DC Converters
      • Up to 100W DC/DC Converters
      • 100W - 250W DC/DC Converters
      • 250W - 500W DC/DC Converters
      • High Input Voltage DC/DC Converters
    • High Voltage DC/DC Converters
      • Proportional High Voltage DC/DC Converters
      • Regulated High Voltage DC/DC Converters
    • PCB Mount DC/DC Converters
      • Single In Line Package DC/DC Converters
      • Regulated DC/DC Converters
      • High Power Density Modules DC/DC Converters
  • DC/AC Inverters
    • Modular DC/AC Inverters
    • Rack Mount DC/AC Inverters
    • Inverter/Chargers
    • Industrial DC/AC Inverters
      • Single Phase Output DC/AC Inverters
      • Three Phase Output DC/AC Inverters
    • Railway DC/AC Inverters
    • AC/AC Frequency Converters
  • AC/DC Power Supplies
    • Standalone AC/DC Power Supplies
    • Adapters & External AC/DC Power Supplies
    • Laboratory AC/DC Power Supplies
    • 19'' Rack Mount AC/DC Power Supplies
    • DIN Rail Mount AC/DC Power Supplies
    • Open Frame & Panel Mount AC/DC Power Supplies
      • Up to 250W AC/DC Power Supplies
      • 250W - 750W AC/DC Power Supplies
      • 600W - 5000W AC/DC Power Supplies
    • Multi-Output AC/DC Power Supplies
    • High Voltage AC/DC Power Supplies
    • LED Lighting AC/DC Power Supplies
      • IP20
      • IP65
    • PCB Mount AC/DC Power Supplies
  • Battery Chargers
    • Modular & Configurable Battery Chargers
    • Thyristor Controlled Battery Chargers
    • Deep Cycle Battery Chargers
    • Security Industry - Battery Chargers
    • Standby Applications Battery Chargers
  • DC Power Distribution Panels
  • DC Power Systems & Accessories
    • Hybrid DC Power Systems
    • Modular DC Power Systems
    • Accessories
      • Diodes & Redundancy Modules
      • Controllers
      • Meters
      • Modular Rectifiers
        • Convection Cooled Rectifiers
        • Fan Cooled Rectifers
    • Rack Mount DC Power Systems
    • Wall Mount DC Power Systems
  • AC UPS
    • Line Interactive AC UPS
    • Three Phase Output AC UPS
    • Industrial & Outdoor AC UPS
    • Single Phase Output AC UPS
  • Automatic & Static Transfer Switches
  • Batteries
    • Batteries For Military Vehicles
    • High Temperature
    • Stable Mains
    • Deep Cycle
    • Unstable Mains
    • 12V Batteries for UPS
  • Programmable AC Power Supply
  • DC Electronic Loads
  • Remote Battery Monitoring Systems
  • Power Quality & Power Factor Correction
    • Active Harmonic Filters
    • Power Conditioners - Voltage Stabilisers
Helios Power
Solutions
Asia

www.heliosps.asia

Office Address

56A Boat Quay
Singapore,
049845

Contact Info

Email: sales@heliosps.asia
Phone: +65 6871 4140

 

 

Helios Power
Solutions
Middle East

www.heliosps.asia

Office Address

105-01 Emaar Sq – Bldg. 4,
Sheikh Mohammed Bin Rashid Blvd
Downtown Dubai, UAE

Contact Info

Email: sales@heliosps.asia
Phone: +971 4 401 8484

Helios Power
Solutions
Australia

www.heliosps.com.au

Office Address

Unit 6, 2-8 South St,
Rydalmere,Sydney,
NSW, Australia, 2116

Contact Info

Email: sales@heliosps.com.au
Phone: +61 2 7200 9200

Helios Power
Solutions
New Zealand

www.heliosps.co.nz

Office Address

3 Heremai Street,
Henderson, Auckland,
New Zealand, 0612

Contact Info

Email: sales@heliosps.co.nz
Phone: +64 9 835 0700

Middle East & Asia | English | Get in Touch | Support | Privacy | Terms & Conditions

Product Tags

1U Rack Mount Battery Charger APK FANLESS-INVERTERS Lift Application OPUS DC Power Systems SR TSI - ECI Technology

© Copyright Helios Power Solutions 2023