sales@heliosps.asia

Fully Managed DC Loads over TCP/IP with Smart 1U Rack Distribution Panels

  • Home
  • Our Products
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
background Layer 1
  • Home
  • Our Products
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
Home DC Power Systems & Accessories Rack Mount DC Power Systems

19″ Rack Mount DC Power Systems

DC Power Solutions for Industrial & Telecom Applications

DC Power Systems are designed as standalone units, or as subracks to perform specific power conversion functions in a range of environments.

Following there are some of the customizable features:

  • Special Output connections and alarms and communications.
  • A wide range of Power and Output Voltage combinations.
  • Medical and Railway certifications.
  • Redundant Systems N+1
  • Remote Monitoring & Control.
  • Convection / fan-cooled
  • Load Distribution Integrated and load selectivity
  • Conformal coating for harsh environments
  • Form factor

Product Categories

Industrial Dual Bus DC Distribution Panel 12V 24V 48V

Dual Bus Front Access Industrial DC Distribution Panel 150A

BCH300 BCH500 Rack Mount Battery Charger AC/DC Power Supply 12V 24V 48V 96V 108V Output Voltage Singapore Asia Middle East

BCH300-500-RM – Rack Mount Battery Charger / Power Supply: 300W – 500W

PRO Series 1U Rack Mount Battery Charger - Power Supply for 12V, 24V & 48V Applications

PRO – 1U Rack Mount Battery Charger – AC/DC Power Supply: 690W – 1200W

Rack Mount Modular Battery Charger DC Power Supplies 12V 24V 48V for LMR and Wireless Broadband applications

12V Modular Power Series DC Power System: 700W – 4900W

Rack Mount Modular Battery Charger DC Power Supplies 12V 24V 48V for LMR and Wireless Broadband applications

24V & 48V Modular Power Series DC Power System: 700W – 6000W

SR-RM2U-DUAL

SR Rack Mounting Option

PFC4K-3U - AC/DC Rack Mount Power Supplies: 4500 Watts

PFC4K-3U – AC/DC Rack Mount Power Supplies: 4500W

-48V VDC Rack Mount Modular Rectifier System for telecom applications Middle East Saudi Arabia

HelSys -48VDC Rectifier System up to 3kW for Telecom Applications

OPUS DUAL INVERTER MODULES - Inverter Dual Inverter Modules

OPUS DAC60000 Modular DC/AC Inverter 1-24kVA

Rack Mount Modular Inverter Charger 48V 230VAC Sierra Middle East & Asia Renewable Energy Grid Reinjection

Multidirectional Inverter Charger Sierra 10 48Vdc/230Vac 1.25kVA – 40kVA

Modular DC AC Inverter for Telecom / Datacom Industrial / Transport +24 VDC -48VDC / 230 VAC, 50/60Hz.Industrial / Transport 110 VDC 220VDC / 230 VAC

TSI Bravo – DC/AC Modular Inverters: 110Vdc/230Vac 2.5kVA – 80kVA

Modular DC AC Inverter for Telecom / Datacom Industrial / Transport +24 VDC -48VDC / 230 VAC, 50/60Hz.Industrial / Transport 110 VDC 220VDC / 230 VAC

TSI Bravo – DC/AC Modular Inverters: 220Vdc/230Vac 2.5kVA – 80kVA

Rack Mount Modular Inverter Charger - 48VDC 230VAC 120VAC

Multidirectional Inverter Charger Sierra 25 48/230 3kVA – 2.2MVA

Modular Battery Charger systems 12V Applications - Middle East & Asia

Modular Battery Charger 12V up to 83A 250W per Module

Cordex Rectifiers 400W-24V-Self-2U

Modular Battery Charger 24V up to 70A 400W per Module

Modular Battery Charger 48V up to 67A 650W per Module

12V 24V 48V LMR communications networks, broadband, radio access DC Power Supply repeaters Battery Chargers Middle East Asia

Platinum Series – Battery Charger with Advanced Power Management: 800W – 1600W

OPUS HE 7U Modular Battery Charger - Industrial DC UPS - Helios Power Solutions - Bangladesh - Malaysia

OPUS HE 7U Modular Battery Charger up to 6kW

OPUS HE 12U Modular Battery Charger For Electrical Substations - Efore 24V 48V 110V 220V Output voltage

OPUS HE 12U Modular Battery Charger up to 10kW

The-SOL-Series-1.2kW-48Vdc 1RU Integrated Shelf System with GMT Distribution

Modular Battery Charger 48V up to 75A 1.2kW per Module

2.4kW Modular Rectifier Shelf System Battery Charger - Dubai - Singapore Indonesia Malaysia

Modular Battery Charger 48V up to 250A 2.4kW per Module – Fan Cooled System

Featured Post

Fully managed DC loads over TCP IP
12V, 24V & 48VDC Fully Managed DC Loads

Search Products

SEARCH

Product categories

  • DC UPS System
  • DC/DC Converters
    • DIN Rail Mount DC/DC Converters
    • Industrial DC/DC Converters
    • High Input Voltage Industrial DC/DC Converters
    • Mil-Spec Isolated & Non-Isolated DC/DC Converters
    • Railway DC/DC Converters
      • Up to 100W DC/DC Converters
      • 100W - 250W DC/DC Converters
      • 250W - 500W DC/DC Converters
      • High Input Voltage DC/DC Converters
    • High Voltage DC/DC Converters
      • Proportional High Voltage DC/DC Converters
      • Regulated High Voltage DC/DC Converters
    • PCB Mount DC/DC Converters
      • Single In Line Package DC/DC Converters
      • Regulated DC/DC Converters
      • High Power Density Modules DC/DC Converters
  • DC/AC Inverters
    • Modular DC/AC Inverters
    • Rack Mount DC/AC Inverters
    • Inverter/Chargers
    • Industrial DC/AC Inverters
      • Single Phase Output DC/AC Inverters
      • Three Phase Output DC/AC Inverters
    • Railway DC/AC Inverters
    • AC/AC Frequency Converters
  • AC/DC Power Supplies
    • Standalone AC/DC Power Supplies
    • Adapters & External AC/DC Power Supplies
    • Laboratory AC/DC Power Supplies
    • 19'' Rack Mount AC/DC Power Supplies
    • DIN Rail Mount AC/DC Power Supplies
    • Open Frame & Panel Mount AC/DC Power Supplies
      • Up to 250W AC/DC Power Supplies
      • 250W - 750W AC/DC Power Supplies
      • 600W - 5000W AC/DC Power Supplies
    • Multi-Output AC/DC Power Supplies
    • High Voltage AC/DC Power Supplies
    • LED Lighting AC/DC Power Supplies
      • IP20
      • IP65
    • PCB Mount AC/DC Power Supplies
  • Battery Chargers
    • Modular & Configurable Battery Chargers
    • Thyristor Controlled Battery Chargers
    • Deep Cycle Battery Chargers
    • Security Industry - Battery Chargers
    • Standby Applications Battery Chargers
  • DC Power Distribution Panels
  • DC Power Systems & Accessories
    • Hybrid DC Power Systems
    • Modular DC Power Systems
    • Accessories
      • Diodes & Redundancy Modules
      • Controllers
      • Meters
      • Modular Rectifiers
        • Convection Cooled Rectifiers
        • Fan Cooled Rectifers
    • Rack Mount DC Power Systems
    • Wall Mount DC Power Systems
  • AC UPS
    • Line Interactive AC UPS
    • Three Phase Output AC UPS
    • Industrial & Outdoor AC UPS
    • Single Phase Output AC UPS
  • Automatic & Static Transfer Switches
  • Batteries
    • Batteries For Military Vehicles
    • High Temperature
    • Stable Mains
    • Deep Cycle
    • Unstable Mains
    • 12V Batteries for UPS
  • Programmable AC Power Supply
  • DC Electronic Loads
  • Remote Battery Monitoring Systems
  • Power Quality & Power Factor Correction
    • Active Harmonic Filters
    • Power Conditioners - Voltage Stabilisers
Helios Power
Solutions
Asia

www.heliosps.asia

Office Address

56A Boat Quay
Singapore,
049845

Contact Info

Email: sales@heliosps.asia
Phone: +65 6871 4140

 

 

Helios Power
Solutions
Middle East

www.heliosps.asia

Office Address

105-01 Emaar Sq – Bldg. 4,
Sheikh Mohammed Bin Rashid Blvd
Downtown Dubai, UAE

Contact Info

Email: sales@heliosps.asia
Phone: +971 4 401 8484

Helios Power
Solutions
Australia

www.heliosps.com.au

Office Address

Unit 6, 2-8 South St,
Rydalmere,Sydney,
NSW, Australia, 2116

Contact Info

Email: sales@heliosps.com.au
Phone: +61 2 7200 9200

Helios Power
Solutions
New Zealand

www.heliosps.co.nz

Office Address

3 Heremai Street,
Henderson, Auckland,
New Zealand, 0612

Contact Info

Email: sales@heliosps.co.nz
Phone: +64 9 835 0700

Middle East & Asia | English | Get in Touch | Support | Privacy | Terms & Conditions

Product Tags

1U Rack Mount Battery Charger APK FANLESS-INVERTERS Lift Application OPUS DC Power Systems SR TSI - ECI Technology

© Copyright Helios Power Solutions 2023