sales@heliosps.asia

Fully Managed DC Loads over TCP/IP with Smart 1U Rack Distribution Panels

  • Home
  • Our Products
    • DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
background Layer 1
  • Home
  • Our Products
    • DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
Home DC/DC Converters Industrial DC/DC Converters

Industrial Grade DC/DC Converters

Certified and approved for critical power requirements

Helios Power Solutions offers a range of industrial grade DC/DC converters that are enclosed in a vented case, intended for panel mounting but can be assembled in 19″ Rack mounting as well. Helios’ DC-DC products are integrated in protection, control, wireless networks, auxiliary and emergency systems among many other applications. The standard models are available in power ratings from 15W to 5000W, custom-made solutions can be designed to meet your specific requirements. 

Best-selling Series of Industrial DC-DC Converters

Our 8862 and APK series, for example, are established products and one of our most popular around the 60-70W power level.

Our IEXT & IEHR Series 70W – 150W made in NZ are well-known and reliable models used in a wide range of industrial applications such as Oil & Gas, Power Utilities and Telecom. Redundancy diode,  alarms, low noise,  DIN mounting option and special design for forklift applications are some of our custom features that make the IEHR & IHXT range of converters unique.

Our DCW series offers wide input ranges of 20-60V and 65-160V making them ideal for many Telecom and Industrial applications from 100-500W. BAP Series high power range of industrial DC Converters up to 2500W, options include a form C output fail alarm, remote shutdown, and designs to meet railway specifications.

Isolated Series 2: Models are available from 120 watts and 420 watts, in step up and step down models, to match your needs input voltages range from 10 to 60VDC, with outputs in 12V, 24V, and 48V to cover virtually every wireless communication application requirement.

Check out our range of panel mounting dc to dc converters below and contact our team of engineers for further assistance.

Product Categories

NiQor HV Non-Isolated 0-90V Output DC/DC Converters

UFEC15W - DC/DC Converter Single & Dual Output: 15W

UFEC15W – DC/DC Converter Single & Dual Output: 15W

solar converter 15 watts transport applications - conversor

JVA15 – Solar DC/DC Converters: 15W

UFED20W - DC/DC Converter Single & Dual Output: 20W

UFED20W – DC/DC Converter Single & Dual Output: 20W

DTE20 Series DC/DC Converters 20 W - Chassis Mount - DIN Rail

DTE20 Series DC/DC Converters 20W

APK25-60 - DC/DC Converter Single Output: 25-60 W

APK25 – APK60 – DC/DC Single Output: 25W – 60W

UFEC30W - DC/DC Converter Single & Dual Output: 30W

UFEC30W – DC/DC Converter Single & Dual Output: 30W

UFEC40W - DC/DC Converter Single & Dual Output: 40W

UFEC40W – DC/DC Converter Single & Dual Output: 40W

UFED40W - DC/DC Converter Single & Dual Output: 40W

UFED40W – DC/DC Converter Single & Dual Output: 40W

solar converter 40 watts transport applications

JVA40 – Solar DC/DC Converters: 40W

DTE40 Series DC/DC Converters 40W

600Vdc Input, 50W Rugged Industrial Quality Isolated DC-DC Converter

HVI 50-F1 600Vdc High Input Voltage – DC/DC Converter 50W

900Vdc Input, 50W Rugged Industrial Quality Isolated DC-DC Converter

HVI 50-F2 900 Vdc High Input Voltage – DC/DC Converter 50W

DCL60 - DC/DC Single Output: 60W

DCL60 – DC/DC Single Output: 60W

UFEC60 - DC/DC Converter Single Output : 60W

UFEC60 – DC/DC Converter Single Output : 60W

DTE60 Series DC/DC Converters 60W - Chassis Mount - DIN Rail DC/DC Converter

DTE60 Series DC/DC Converters 60W

HAE75W – DC/DC Converter: 75W

8862 - Isolated DC/DC Converter: 70W DC input options: 12V, 24V, 36V, 48V, 110VDC

8862 – DC/DC Converter: 70W

Isolated DC/DC Converter manufactured by HPS. 5V 12V 24V 48V output voltage.12V to 24V 12V to 5V 12V to 12V 12V to 48V. Constant current limit for charging - CONVERTER DC/DC 70-150W - Charging Applications Indonesia

IEXT IEHR DC/DC Converter 70W – 150W

DCW100-200 - DC/DC Converter Single Output: 100 ~ 200W DC/DC Converter Industrial 12V 24V 48V 110V to 48V 110V to 24V

DCW100 – DCW200 – DC/DC Converter: 100W – 200W

DCW102 - DC/DC Converter Dual Output: 100W

DCW102 – DC/DC Converter Dual Output: 100W

600Vdc Input, 100W Rugged Industrial Quality

HVI 100-F2 600 Vdc High Input Voltage – DC/DC Converter 100W

600Vdc, Wide Input Range, 100W Rugged Industrial Quality

HVI 109-F2 600 Vdc High Input Voltage – DC/DC Converter 100W

Isolated Series 2 - Fully Isolated DC/DC Power Converter 120W - 420W Asia - Thailand - Indonesia 12V 24V 48VDC output voltage

Isolated Series 2 Fully Isolated DC/DC Power Converter 120W – 420W

APK120 - DC/DC Single Output: 120 W

APK120 – DC/DC Converter Single Output: 120W

DCW162 - DC/DC Converter Dual Output: 150W

DCW162 – DC/DC Converter Dual Output: 150W

WAF150 Series - Railway Standards DC/DC converter 12V 15V 24V 48V output voltage.DIN Rail & Chassis Mounting

WAF150 – Wide Input Range DC/DC Converter Single Output: 150W

600Vdc Input, 150W Rugged Industrial Quality

HVI 150-F2 High Input Voltage – DC/DC Converter 150W

BAP-EURO-SYSTEM - 19in Racks DC/DC Power Systems: 200 ~ 2500W

BAP-EURO-SYSTEM – 19in Racks DC/DC Power Systems: 200W – 2500W

Convection cooled industrial DC to DC Converter 400W.12V to 24V, 12V to 28V, 12V to 36V, 12V to 48V, 12V to 110VDC

LTH236 – DC/DC Converter 12V input: 240W

DCW300-500 - DC/DC Converter Single Output: 300 ~ 500W DIN Rail Rack Mount Middle East Asia

DCW300-DCW500 – DC/DC Converter Single Output: 300W – 500W

600Vdc Input, Rugged 300W Industrial Quality

HVI 300-F3 High Input Voltage – DC/DC Converter 300W

WAF300 DC-DC Converter Railway Standards EN50155 AND EN45545-2

WAF300 – DC/DC Converter Single Output: 300W

LTH400 - DC/DC Converter 12V input: 400W 12V to 24V, 12V to 28V, 12V to 36V, 12V to 48V, 12V to 110VDC.

LTH400 – DC/DC Converter 12V input: 400W

1000Vdc Input, 500W Rugged Industrial Quality

HVI 500-1K-XX-FX-1200 Vdc-Input Voltage – DC/DC Converter 500W

HVI-500-FX 600Vdc Input, 500W Rugged Industrial Quality

HVI 500-FX High Input Voltage – DC/DC Converter 500W

600Vdc Input, 500W, IP66-Rated DC/DC Converter 600VDC Input

HVI 500P-D3G 600 Vdc High Input Voltage – IP66 enclosure – DC/DC Converter 500W

BAP319F - DC/DC Converter Single Output: 750 W

BAP319F – DC/DC Converter Single Output: 750W

BAP65F - DC/DC Converter 750-1000 W

BAP65F – DC/DC Converter 750W-1000W

BAP1K - DC/DC Converter Single Output: 1000 W

BAP1K – DC/DC Converter Single Output: 1000W

Rack Mount SITE-SERIES - High Current DC to DC Isolated Converter for 12V and 24V DC Site Equipment

Site Series Isolated DC/DC Converter, 12Vdc output: Up to 100A

BAP1K5 - DC/DC Converter: 1500W

BAP1K5 – DC/DC Converter: 1500W

600Vdc Input, 2kW Rugged, Industrial Quality DC-DC Converter

HVI 2K-3U3 High Input Voltage – DC/DC Converter 2000W

BAP2K5 - DC/DC Converter: 2500W

BAP2K5 – DC/DC Converter: 2500W

High Input Voltage DC/DC Converter 600VDC

HVI 5K-3U7 600Vdc Input, Industrial DC/DC Converter: 5000W

OPUS EDC Modular DC-DC

OPUS EDC Modular DC/DC Converter 500W to 10kW

Featured Post

DIN Rail 360W DC Power and Distribution Solution

POWER

MOUNTING

OTHER FEATURES

INPUT VOLTAGE

OUTPUT VOLTAGE

OUTPUT VOLTAGE V1

OUTPUT VOLTAGE V2

OUTPUT VOLTAGE V3

Product categories

  • DC UPS System
  • DC/DC Converters
    • DIN Rail Mount DC/DC Converters
    • Industrial DC/DC Converters
    • High Input Voltage Industrial DC/DC Converters
    • Mil-Spec Isolated & Non-Isolated DC/DC Converters
    • Railway DC/DC Converters
      • Up to 100W DC/DC Converters
      • 100W - 250W DC/DC Converters
      • 250W - 500W DC/DC Converters
      • High Input Voltage DC/DC Converters
    • High Voltage DC/DC Converters
      • Proportional High Voltage DC/DC Converters
      • Regulated High Voltage DC/DC Converters
    • PCB Mount DC/DC Converters
      • Single In Line Package DC/DC Converters
      • Regulated DC/DC Converters
      • High Power Density Modules DC/DC Converters
  • DC/AC Inverters
    • Modular DC/AC Inverters
    • Rack Mount DC/AC Inverters
    • Inverter/Chargers
    • Industrial DC/AC Inverters
      • Single Phase Output DC/AC Inverters
      • Three Phase Output DC/AC Inverters
    • Railway DC/AC Inverters
    • AC/AC Frequency Converters
  • AC/DC Power Supplies
    • Standalone AC/DC Power Supplies
    • Adapters & External AC/DC Power Supplies
    • Laboratory AC/DC Power Supplies
    • 19'' Rack Mount AC/DC Power Supplies
    • DIN Rail Mount AC/DC Power Supplies
    • Open Frame & Panel Mount AC/DC Power Supplies
      • Up to 250W AC/DC Power Supplies
      • 250W - 750W AC/DC Power Supplies
      • 600W - 5000W AC/DC Power Supplies
    • Multi-Output AC/DC Power Supplies
    • High Voltage AC/DC Power Supplies
    • LED Lighting AC/DC Power Supplies
      • IP20
      • IP65
    • PCB Mount AC/DC Power Supplies
  • Battery Chargers
    • Modular & Configurable Battery Chargers
    • Thyristor Controlled Battery Chargers
    • Deep Cycle Battery Chargers
    • Security Industry Battery Chargers
    • Standby Applications Battery Chargers
  • DC Power Distribution Panels
  • DC Power Systems & Accessories
    • Hybrid DC Power Systems
    • Modular DC Power Systems
    • Accessories
      • Diodes & Redundancy Modules
      • Controllers
      • Meters
      • Modular Rectifiers
        • Convection Cooled Rectifiers
        • Fan Cooled Rectifers
    • Rack Mount DC Power Systems
    • Wall Mount DC Power Systems
  • AC UPS
    • Line Interactive AC UPS
    • Three Phase Output AC UPS
    • Industrial & Outdoor AC UPS
    • Single Phase Output AC UPS
  • Automatic & Static Transfer Switches
  • Batteries
    • Batteries For Military Vehicles
    • High Temperature
    • Stable Mains
    • Deep Cycle
    • Unstable Mains
    • 12V Batteries for UPS
  • Programmable AC Power Supply
  • DC Electronic Loads
  • Remote Battery Monitoring Systems
  • Power Quality & Power Factor Correction
    • Active Harmonic Filters
    • Power Conditioners - Voltage Stabilisers
Helios Power
Solutions
Asia

www.heliosps.asia

Office Address

56A Boat Quay
Singapore,
049845

Contact Info

Email: sales@heliosps.asia
Phone: +65 6871 4140

 

 

Helios Power
Solutions
Middle East

www.heliosps.asia

Office Address

105-01 Emaar Sq – Bldg. 4,
Sheikh Mohammed Bin Rashid Blvd
Downtown Dubai, UAE

Contact Info

Email: sales@heliosps.asia
Phone: +971 4 401 8484

Helios Power
Solutions
Australia

www.heliosps.com.au

Office Address

Unit 6, 2-8 South St,
Rydalmere,Sydney,
NSW, Australia, 2116

Contact Info

Email: sales@heliosps.com.au
Phone: +61 2 7200 9200

Helios Power
Solutions
New Zealand

www.heliosps.co.nz

Office Address

3 Heremai Street,
Henderson, Auckland,
New Zealand, 0612

Contact Info

Email: sales@heliosps.co.nz
Phone: +64 9 835 0700

Middle East & Asia | English | Get in Touch | Support | Privacy | Terms & Conditions

Product Tags

1U Rack Mount Battery Charger APK DIN Rail DC UPS FANLESS-INVERTERS Lift Application OPUS DC Power Systems SR TSI - ECI Technology

© Copyright Helios Power Solutions 2023