- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
- Home
- Our Products
- DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Battery Chargers
- Distribution Panels
- DC Power Systems & Accessories
- DC Electronic Loads
- AC UPS
- Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
- Remote Battery Monitoring Systems
- Batteries
- Power Quality Solutions
- Programmable AC Power SupplyProgrammable AC Power Supply
- Custom Solutions
- Industries
- Services
- Support
- About Us
- News
- Contact Us
- My Enquiries
Deep Cycle Battery Chargers
A deep cycle battery is specifically designed to have the majority of the battery’s capacity used up without causing any damages to the battery.For “CYCLIC” applications, our 3 Step battery chargers with Timer Boost control provide options for charging lead-acid batteries from 3AH and up to 1000AH capacity. To learn more about our products, click the links below or contact us to receive the best assistance from our Technical Sales Engineers.
Product Categories
Featured Post
Product categories
- DC UPS System
- DC/DC Converters
- DC/AC Inverters
- AC/DC Power Supplies
- Standalone AC/DC Power Supplies
- Adapters & External AC/DC Power Supplies
- Laboratory AC/DC Power Supplies
- 19'' Rack Mount AC/DC Power Supplies
- DIN Rail Mount AC/DC Power Supplies
- Open Frame & Panel Mount AC/DC Power Supplies
- Multi-Output AC/DC Power Supplies
- High Voltage AC/DC Power Supplies
- LED Lighting AC/DC Power Supplies
- PCB Mount AC/DC Power Supplies
- Battery Chargers
- DC Power Distribution Panels
- DC Power Systems & Accessories
- AC UPS
- Automatic & Static Transfer Switches
- Batteries
- Programmable AC Power Supply
- DC Electronic Loads
- Remote Battery Monitoring Systems
- Power Quality & Power Factor Correction
© Copyright Helios Power Solutions 2023