sales@heliosps.asia

Fully Managed DC Loads over TCP/IP with Smart 1U Rack Distribution Panels

  • Home
  • Our Products
    • DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
background Layer 1
  • Home
  • Our Products
    • DC UPS SystemDC UPS Systems DC Power Supply + Battery Backup in one single unit Our Smart DC UPS Systems have ethernet-based communications and control in every model and are suitable for standby and cyclic applications. Some of the load and battery monitorable parameters are: Mains fails – PSU fails Battery missing – Battery low Charge current control Monitoring and reporting of battery current and state of charge Low voltage disconnect operation Automatic battery test Battery temperature compensation Multi-stage Charging modes ( Boost – Absorption – Float – Recovery) 12V DC UPS 24V DC UPS 48V DC UPS 110V DC UPS
    • DC/DC Converters
    • DC/AC Inverters
    • AC/DC Power Supplies
    • Battery Chargers
    • Distribution Panels
    • DC Power Systems & Accessories
    • DC Electronic Loads
    • AC UPS
    • Automatic & Static Transfer SwitchesIndustrial Static Transfer Switches The Static Transfer Switch is a critical component for increasing resiliency and minimizing downtime in any critical electrical installation. It is frequently used in the data centre environment with 2N configuration for provision of redundancy for devices without dual power supplies. Normally fed from two independent UPSs or a group of UPSs they seamlessly transfer the critical load from one UPS to the other for maintenance purposes or in case of complete loss of one of the supplies. They can economically provide the next level of redundancy for critical installations where 2N configuration is not available and infrastructure changes would be prohibitively expensive and disruptive to the operation of the business. They are available in different formats from small DIN-rail mounted units, single-phase bypass switches for industrial application, rack-mounted single and 3 phase static switches for telco and data centre applications, to wall-mounted and freestanding units in single and 3 phase for protection of whole departments or complete critical infrastructure. Automatic Transfer Switch (ATS) Vs  Static Transfer Switch (STS) An STS – static transfer switch has no mechanical switching devices (SCRs used for switching) and on manual command, transfers your critical load at the point of…New
    • Remote Battery Monitoring Systems
    • Batteries
    • Power Quality Solutions
    • Programmable AC Power SupplyProgrammable AC Power Supply
  • Custom Solutions
    • Low DC Power Applications
    • Medium & High Dc Power Applications
  • Industries
  • Services
    • Custom Design
    • Helios Service Department
    • Turnkey Solutions
  • Support
    • RMAs
    • Privacy Policy
    • Terms and Conditions
    • Application Notes
    • SR Series Comms Downloads
  • About Us
    • Our Business
    • History
    • Our Team
  • News
  • Contact Us
  • My Enquiries
Home Battery Chargers

Battery Chargers

When you need a battery charger that will deliver you need a HELIOS  battery charger. We design and build all of our products and over our many decades, we have refined our designs, delivering the perfect balance between performance and reliability. We manufacture a range of battery chargers for many different applications.

Battery chargers offered by HELIOS cater for a wide range of applications….DC Stand by systems, back up chargers for security/access control, industrial battery charger & general-purpose types.

For “CYCLIC” applications, our 3 Step battery chargers with Timer Boost control provide options for charging lead-acid batteries from 3AH and up to 1000AH capacity.

Our battery-backed chargers offer separate outputs for Load and Battery charging with a range of alarms, monitoring and control protocols.

Our battery chargers for back-up industrial applications and can be customised to suit your unique applications. We also manufacture Modular Chargers with Hot-Swappable capabilities plus a convenient serviceable 19in Rack Mounting system.

Dear customer, please use the banner on the left side to filter our Battery Chargers by main features or keep browsing by categories. If using the left banner, we advise using just those fields that are relevant for your application; many conditions might incur in an unsuccessful search. Do not hesitate to contact us to receive the best assistance from our Technical Sales Engineers.

Product Categories

Hybrid Series 1U Rack Mount Dual Output 24V 48V 12V system

Hybrid Power Series up to 3kW Dual Output DC Power System 48/24-12Vdc

Opus HE 5U DC UPS 48V 24V 110V 125V 220Vdc

OPUS HE 5U Modular DC UPS System up to 16kW

Rack Mount Modular Battery Charger DC Power Supplies 12V 24V 48V for LMR and Wireless Broadband applications

24V & 48V Modular Power Series DC Power System: 700W – 6000W

MPS Ultra - 2U Redundant Hot Swap Modular DC Power System AC DC Power Supply Battery Charger -Remote Monitoring for Land Mobile Radio and Wireless Broadband Applications 12V 24V 48V output voltage

MPS Ultra – 2U Redundant Hot Swap Modular DC Power System up to 12kW

-48V VDC Rack Mount Modular Rectifier System for telecom applications Middle East Saudi Arabia

HelSys -48VDC Rectifier System up to 3kW for Telecom Applications

OPUS HE OC0864 Modular DC Power System 48V 60V 110V 220V output voltage modular converters, inverters rectifiers

OPUS HE OC0864 Wall Mount DC Power System 4.5kW – 12kW

OPUS HE WMC Convection Cooled Wall Mount Battery Charger 2000W

OPUS HE WMC Convection Cooled Battery Charger 2kW

DC UPS - Power Supply 100 W - Battery Charger 100 W - Temperature Compensation - Low Voltage Disconnect -Battery Monitoring - Battery Condition Test - Digital Inputs & Outputs SNMP RS485 Modbus Webpages RS232 Fuente de Poder - pengecas bateri

SR 100HI DC UPS On-line Monitoring Of Battery and Charger Status 100W

360W DC UPS 24V 48V - DIN Rail Mount

DIN Series 24V & 48V DC UPS 360W

Intellicharge Series - 3 Stage Battery Charger: 12, 24 and 48V DC Models , 180W or 360W

Intellicharge Series 3-Stage Battery Charger: 360W

Modular Battery Charger Systems for power utilities 125Vdc 220Vdc 24Vdc 12Vdc 48Vdc SCADA

The Sol Series DC Power System With Battery Backup

SR DC UPS 250 W - Battery Charger - Bangladesh - Laos - Philippines

SR250HI – DC UPS – On-line Monitoring Of Battery and Charger Status 250W

CBI4810A 48V DIN Rail DC UPS

CBI4810A 48V DIN Rail DC UPS 500W

Modular Battery Charger 48V up to 67A 650W per Module

12V 24V 48V LMR communications networks, broadband, radio access DC Power Supply repeaters Battery Chargers Middle East Asia

Platinum Series – Battery Charger with Advanced Power Management: 800W – 1600W

OPUS HE 7U Modular Battery Charger - Industrial DC UPS - Helios Power Solutions - Bangladesh - Malaysia

OPUS HE 7U Modular Battery Charger up to 6kW

OPUS HE 12U Modular Battery Charger For Electrical Substations - Efore 24V 48V 110V 220V Output voltage

OPUS HE 12U Modular Battery Charger up to 20kW

The-SOL-Series-1.2kW-48Vdc 1RU Integrated Shelf System with GMT Distribution

Modular Battery Charger 48V up to 75A 1.2kW per Module

2.4kW Modular Rectifier Shelf System Battery Charger - Dubai - Singapore Indonesia Malaysia

Modular Battery Charger 48V up to 250A 2.4kW per Module – Fan Cooled System

Featured Post

DIN Rail 360W DC Power and Distribution Solution

POWER

OUTPUT VOLTAGE

INPUT VOLTAGE

APPLICATIONS

MOUNTING

OTHER FEATURES

Product categories

  • DC UPS System
  • DC/DC Converters
    • DIN Rail Mount DC/DC Converters
    • Industrial DC/DC Converters
    • High Input Voltage Industrial DC/DC Converters
    • Mil-Spec Isolated & Non-Isolated DC/DC Converters
    • Railway DC/DC Converters
      • Up to 100W DC/DC Converters
      • 100W - 250W DC/DC Converters
      • 250W - 500W DC/DC Converters
      • High Input Voltage DC/DC Converters
    • High Voltage DC/DC Converters
      • Proportional High Voltage DC/DC Converters
      • Regulated High Voltage DC/DC Converters
    • PCB Mount DC/DC Converters
      • Single In Line Package DC/DC Converters
      • Regulated DC/DC Converters
      • High Power Density Modules DC/DC Converters
  • DC/AC Inverters
    • Modular DC/AC Inverters
    • Rack Mount DC/AC Inverters
    • Inverter/Chargers
    • Industrial DC/AC Inverters
      • Single Phase Output DC/AC Inverters
      • Three Phase Output DC/AC Inverters
    • Railway DC/AC Inverters
    • AC/AC Frequency Converters
  • AC/DC Power Supplies
    • Standalone AC/DC Power Supplies
    • Adapters & External AC/DC Power Supplies
    • Laboratory AC/DC Power Supplies
    • 19'' Rack Mount AC/DC Power Supplies
    • DIN Rail Mount AC/DC Power Supplies
    • Open Frame & Panel Mount AC/DC Power Supplies
      • Up to 250W AC/DC Power Supplies
      • 250W - 750W AC/DC Power Supplies
      • 600W - 5000W AC/DC Power Supplies
    • Multi-Output AC/DC Power Supplies
    • High Voltage AC/DC Power Supplies
    • LED Lighting AC/DC Power Supplies
      • IP20
      • IP65
    • PCB Mount AC/DC Power Supplies
  • Battery Chargers
    • Modular & Configurable Battery Chargers
    • Thyristor Controlled Battery Chargers
    • Deep Cycle Battery Chargers
    • Security Industry Battery Chargers
    • Standby Applications Battery Chargers
  • DC Power Distribution Panels
  • DC Power Systems & Accessories
    • Hybrid DC Power Systems
    • Modular DC Power Systems
    • Accessories
      • Diodes & Redundancy Modules
      • Controllers
      • Meters
      • Modular Rectifiers
        • Convection Cooled Rectifiers
        • Fan Cooled Rectifers
    • Rack Mount DC Power Systems
    • Wall Mount DC Power Systems
  • AC UPS
    • Line Interactive AC UPS
    • Three Phase Output AC UPS
    • Industrial & Outdoor AC UPS
    • Single Phase Output AC UPS
  • Automatic & Static Transfer Switches
  • Batteries
    • Batteries For Military Vehicles
    • High Temperature
    • Stable Mains
    • Deep Cycle
    • Unstable Mains
    • 12V Batteries for UPS
  • Programmable AC Power Supply
  • DC Electronic Loads
  • Remote Battery Monitoring Systems
  • Power Quality & Power Factor Correction
    • Active Harmonic Filters
    • Power Conditioners - Voltage Stabilisers
Helios Power
Solutions
Asia

www.heliosps.asia

Office Address

56A Boat Quay
Singapore,
049845

Contact Info

Email: sales@heliosps.asia
Phone: +65 6871 4140

 

 

Helios Power
Solutions
Middle East

www.heliosps.asia

Office Address

105-01 Emaar Sq – Bldg. 4,
Sheikh Mohammed Bin Rashid Blvd
Downtown Dubai, UAE

Contact Info

Email: sales@heliosps.asia
Phone: +971 4 401 8484

Helios Power
Solutions
Australia

www.heliosps.com.au

Office Address

Unit 6, 2-8 South St,
Rydalmere,Sydney,
NSW, Australia, 2116

Contact Info

Email: sales@heliosps.com.au
Phone: +61 2 7200 9200

Helios Power
Solutions
New Zealand

www.heliosps.co.nz

Office Address

3 Heremai Street,
Henderson, Auckland,
New Zealand, 0612

Contact Info

Email: sales@heliosps.co.nz
Phone: +64 9 835 0700

Middle East & Asia | English | Get in Touch | Support | Privacy | Terms & Conditions

Product Tags

1U Rack Mount Battery Charger APK DIN Rail DC UPS FANLESS-INVERTERS Lift Application OPUS DC Power Systems SR TSI - ECI Technology

© Copyright Helios Power Solutions 2023